PTFE, FEP, and PFA are the most well-known and commonly utilised fluoroplastics. But what are the differences between them? Learn why fluoropolymers are unique and which fluoroplastic is suitable for your application.
The properties of fluoroplastics:
Fluoropolymers offer a number of unique characteristics that make them suited for a wide range of applications, including residential, medical, automotive as well as electrical.
Noble Glass Works is the most prominent and noted PTFE Lined Ball Valves manufacturer in India.
The properties:
- They can withstand extremely high temperatures,
- They have non-stick qualities,
- They are known to have a low friction surface,
- They have extreme resistance to solvents, chemicals, as well as electricity.
Different fluoroplastics have small differences, such as different working temperatures, and are suitable for different applications. When used effectively, fluoropolymers can give significant cost and performance benefits.
Noble Glass Works is a respected PTFE Lined Ball Valves manufacturer in Gujarat.
1. PTFE (Polytetrafluoroethylene):
The forefather of all fluoroplastics is polytetrafluoroethylene or PTFE. The most prevalent fluoropolymer is PTFE, which was discovered by chemist Roy J. Plunkett in 1938 and has the best temperature, chemical resistance, and non-stick properties.
Aside from the unique properties of fluoroplastics, PTFE stands out by providing the following benefits:
- It has the best price-performance ratio of any fluoroplastic, and it can work continuously at 260°C + temperature, which is the highest of any other fluoroplastic.
- It is chemically resistant, has strong non-stick characteristics, and is translucent in colour.
The fact that PTFE does not dissolve when heated is its primary disadvantage, making it difficult to process. Very uncommon methods are required to mould, extrude, and fuse this fluoropolymer.
PTFE is ideal for electronic component protection as well as electrical insulation due to its unique properties.
Noble Glass Works is one of the excellent as well as most reliable PTFE High Pressure Bellows manufacturers in India.
2. FEP (Fluoroethylenepropylene):
FEP is the melt-processable version of PTFE (Fluoroethylenepropylene). FEP is similar to PTFE in terms of properties, although it has a lower maximum operating temperature of +200°C. FEP, on the other hand, is easier to work with and can be welded and re-moulded into complex shapes.
In addition to the unique properties of fluoroplastics, FEP has the following advantages:
- It has a great potential for welding and re-moulding, and it can act without hesitation at temperatures ranging from -200°C to +200°C and cryogenic temperatures. FEP is highly resistant to chemicals and ultraviolet rays, and it is bio-compatible and clear in colour.
The low shrink temperature of FEP heat shrink allows it to be safely shrunk over objects that are temperature-sensitive without causing any kind of injury. As a result, FEP is a fantastic material for encasing sensitive electrical components and equipment.
If you are looking for the renowned and most prevalent PTFE Lined Ball valve manufacturer in India, Noble Glass Works is the right choice for you.
3. PFA (Perfluoralkoxy):
PFA, or perfluoralkoxy, is a high-temperature FEP derivative. PFA has similar properties to FEP, but because of its lower melt viscosity than PTFE, it can be used at temperatures up to +260°C and still be melt-processed.
In addition to the distinctive characteristics of fluoropolymers, PFA stands out by providing the following benefits:
- It has the same ability to work at 260°C+ as PTFE, and it has a high potential for welding and re-moulding.
- It has good permeability resistance, is chemically resistant even when working at high temperatures, is biocompatible, and has a clear colour.
The main disadvantage of PFA is that it is more costly than PTFE and FEP.
PFA is used in applications that require a higher purity grade, better chemical resistance, and a higher working temperature. Medical tubing, valve liners, pumps and fittings, semi-conductor baskets, as well as heat exchangers all use this fluoroplastic.